DRILL HOLE
-
Using a Standard Masonry Bit, drill a hole into the concrete to a depth of at least 7-1/2”.
CLEAN HOLE
Blow the hole clean of dust and other material.
Insert the anchor through the sill plate and washer into the anchor hole.
Thread a Hurri-Bolt Coupler onto the anchor.
-
DRIVE
ANCHOR
-
Begin tightening the anchor by applying forward pressure when engaging the first few threads.
- Continue tightening the anchor until the coupler is firmly seated against the sill plate washer.
-
Use of an impact wrench is recommended.
-
COMPLETE
ASSEMBLY
The Hurri-Wedge installation is now complete.
Install remaining Hurri-Bolt components.
