Single Family Multi-Family

Compare Approvals Design System Install Detail Download CD Rom Contact FAQs

 

Installation Instructions (PDF) HB3

Common Installation Details (PDF) HB1 HB2

 Frequently Requested Details (Link)

HURRI-WEDGE

INSTALLATION INSTRUCTIONS
FOR EXCLUSIVE USE WITH THE HURRI-BOLT TOP PLATE TIE-DOWN SYSTEM SBCCI #9910A


 

DRILL HOLE

 

bullet

Using a Standard Masonry Bit, drill a hole into the concrete to a depth of at least 7-1/2”.


 

CLEAN HOLE

 

bullet

Blow the hole clean of dust and other material.

bullet

Insert the anchor through the sill plate and washer into the anchor hole.

bulletThread a Hurri-Bolt Coupler onto the anchor.


 

DRIVE ANCHOR

 

bullet

Begin tightening the anchor by applying forward pressure when engaging the first few threads.

bulletContinue tightening the anchor until the coupler is firmly seated against the sill plate washer.
bulletUse of an impact wrench is recommended.

COMPLETE ASSEMBLY

 

bullet

The Hurri-Wedge installation is now complete.

bulletInstall remaining Hurri-Bolt components.
US PATENT NUMBER #6,367,205

Hurri-Bolt, Inc.
10704 N46th Street Tampa, FL 33617
TEL (813)626-1676 (800)226-6888 FAX (813)626-8942 www.hurribolt.com

 
When loaded fully, video will replay at full speed.